24 Large Neodymium Block Magnet N52 Grade Rare Earth Magnet Super Strong Magnet

  

This magnets is not a toy and should be handled with extreme caution! 24 New N52 grade neodymium block magnets! Very large 3" x 1 1/4" x 1 Rare Earth magnet. The poles are on the 3" x 1" faces.

As you can see from the meter readings of 6,200 Gauss, this magnets are very strong. Each one of them ranges between 6 - 7k Gauss. These are new stock with factory defects related only to the plating being discolored.

There is no peeling, breaks, damages or chips in these magnets..... Please ask all questions before purchasing.

Company Information: We have many years of experience working with high strength magnets and magnetic equipment. If you have any questions at all, do not hesitate to send us a message! We have hundreds of different magnet sizes and types available so if you're not quite sure which one is most suited for your application, we are happy to assist you in finding the most economical solution. We do our best to offer the lowest prices you will find anywhere for the items we have available. You will notice that many of our listings are priced well below market value when compared to other suppliers.

In other words, a good deal for us equals a good deal for you! Our goal is to provide customers with the most affordable solution to their magnetic needs. If by chance you are looking for something in particular that you can't find in our store, send us a message and we'll be happy look through our unlisted material.

We appreciate your interest in our company and look forward to providing the high quality products and services you expect! Below is a short introductory video for Neodymium magnets as it relates to safety, selection and basic material information.

Following the link is additional Magnet-House policy information and answers to some of our most commonly asked questions. Material Safety and Best Practices: All buyers should be aware that magnets have the potential to damage electronic equipment, display screens, other valuable items and life saving devices such as pacemakers. Neodymium and other Rare Earth magnets are very strong and present pinch hazards. Larger pieces of this material have the potential to break bones while smaller sizes present a risk for ingestion.

This material should not be left unattended, in areas where pets or people under the age of 18 have access. Do not drill, cut or sand Neodymium Rare Earth material.

These processes can expel dust particles and chemicals which are hazardous if inhaled. Hard impacts to this material will cause them to chip or break, creating projectiles and/or cut hazards.

Hard impacts can also create sparks that pose a risk to flammable or ignitable materials. Each of the safety topics and hazards mentioned here do not provide all of the risk associated with this material. Super-strong neodymium magnets crushing a man's hand. Quality Assurance: All of the magnetic material and equipment that we sell is 100% inspected for damage prior to packaging.

In addition to new products, we also offer a wide selection of used, damaged and/or items with defects if you wish to take advantage of discount pricing. This brittleness is true for all Neodymium Rare Earth Magnets. Any chips, cracks or breaks sustained to the material is solely due to mishandling of the product and has nothing to do with product quality or defective material. A Neodymium Rare Earth Magnet that is never handled, will never break but one that is not handled correctly will always break.

Please handle with extreme caution! Allowing these magnets to snap together quickly or against a ferrous object to hard will cause them to chip or break. Super-strong neodymium magnets smashing and exploding.

As a general rule, the larger the magnet, the more susceptible they are to become damage. This is because they typically have higher pull force values and greater mass, which causes them to contact surfaces at a faster rate of speed and with greater force. Understand that smaller Neodymium Rare Earth Magnets also have the potential to become damaged from hard impacts.

This includes damage sustained to the item while trying to separate the material after receipt. All Pull Force ratings provided within each listing for our magnetic materials is based solely on calculations derived from various factors such as magnet dimensions, grade, plating type, surface conditions, etc..

The values provided are approximations and each individual magnet could potentially vary slightly from the estimate. We do however make every effort to provide the most accurate information to our customers.

All buyers should understand that Pull Force values are determined based on applying the entire magnetic material face to a one Inch thick steel plate having perfect surface conditions. Using a magnet on material with poor surface conditions, applying the magnet to a ferrous surface having less than a one inch thickness or partial magnetic face contact will result is lower Pull Force values than what is stated in the listing.

Additionally, all magnetic material will need to have direct contact to the ferrous surface in order to exert the total Pull Force capacity. We would also like to inform all potential buyers that Pull Force is not the same thing as Lift Capacity.

For the most part, all Neodymium Rare Earth Magnets are rated in Pull Force. That value however does not directly translate to a magnets' physical lifting capacity.

There are currently no conversion tables available that provide this information. However in our experience, we have found this value to be around 30% of the rated Pull Force value. Again, these values and estimates are not guarantees. All buyers should perform their own testing to validate all functionality regarding each specific application and end use before implementation of the material. Our intent here is only to provide general reference for customers unfamiliar with magnetic materials.

Please also keep in mind that air gaps between the magnet face and ferrous material will greatly reduce Pull Force and Lift Capacity values. Air gaps include physical air as well as any other non-ferrous material.

As an estimate, buyers can expect a loss of Pull Force and Lift Capacity at a rate of 50% per. 125 inch gap present between the magnet and ferrous material. Meaning, a magnet that has been proven capable to lift an object weighing 4lbs will only be able to lift an object weighing 2lbs when a single. 125 inch piece of wood is between the magnet and ferrous material being lifting. Again, we do not guarantee these values and they are being provided solely as a basis for understanding of how magnetic material functions.

All orders will have tracking numbers available to you for reference. Leaving poor performance comments without contacting us first, does not benefit anyone. 20:40:34 A_+++_Ebayer___As described___Super quick shipping___Great price___THANK YOU_! 23:20:48 Item as described.

22:12:12 These magnets are a lot stronger than I anticipated! 18:34:21 Great Ebayer A+++++ bt (1140) 2017-10-10. 02:34:02 Great product, thanks! 00:39:51 Fast/ accurate product bs (518) 2017-10-09. 20:17:25 Super Magnet!

19:25:28 Great product and great service. This item is in the category "Business & Industrial\Fasteners & Hardware\Magnets". The seller is "magnet-house" and is located in this country: US. This item can be shipped worldwide.

1. Shape: Block
2. Coating: Zinc
3. Model: N52
4. Item Width: 1 in
5. Material: Neodymium
6. Grade: N52
7. Featured Refinements: Neodymium Magnet
8. Plating/Coating: Zinc
9. Color: Gray
10. Item Length: 3 in
11. Brand: Neodymium